Lead Edge Flexo Printing Die Cutting With Slotting Combined Machine

Lead Edge Flexo Printing Die Cutting With Slotting Combined Machine

1. Main features

1.printer slotter phase :electric number digital adjust

2. auto ink circulation system

3. Touch screen on feeding unit

4.The gear of the machine: Auto lubrication with oil

5.Machine body thickness:50mm

6.automatic seperated, pneumatic lock up.

2. Lead feeder

• Automatic suction lead edge feeder equipped with a 7.5kw suction fan to feeding cardboard, the blowing rate is adjustable by the transducer according to the degree of crook of cardboard in order to transmit cardboard smoothly.
• The main control pannel is composed of control buttons and touch screen, which is very convenient and reliable.
• The machine is launched by pressing the start button with two hands, which ensure the operator's safety.
• The side plate is electrical adjusted automatically while the backstop is adjusted manually.
• Sheet cleaner is equipped to remove the contaminants on the cardboard which will improves the printing quality.
• The upper transmission roll is made of seamless steel tube, the surface is covered wearproof rubber, which is also good at avoiding crushing the cardboard.
• The lower transmission roll is made of seamless steel tube, with the treatment of grinding, embossing, and chrome plated.
• The transmission between the upper and lower transmission roll is driven by double slider coupling, which is good at reducing wear down and transmitting smoothly.
• The transmission shaft equipped with electromagnetic friction clutch, for avoiding damaging the motor in case of misoperation or overload.
• Automatic counter for recording the cardboard supply quantity to show the output.

3.Print unit

• All the rolls and shafts are made of high quality steel, with the treatment of dynamic balance correction, grinding and chrome plated.
• The printing phase position is and horizontal movement controlled automatically by touch screen with digital display, the phase position could be adjusted CW or CCW easily with 360 degree because of the equipping of PLC and planetary gearing mechanism.
• Equipped with ink quantity monitoring system, the machine will alarm when out of ink, and stop feeding cardboard.
• The printing plate is hanged by the hanging plate device, the printing roll is able to clockwise rotate and counter clockwise rotate which controlled by the foot switch, it's very convenient for installation and dismounting of printing plate.
• Manual gap adjustment via worm reducer with graduated dial indication such as gap between rubber roll and anilox roll, gap between anilox roll and printing roll etc.
• Equipped with electromagnetic clutch break system to fix the printing phase, when separate the printing unit for adjusting the printing phase, the break system will prevent the gear move, keep the original position.
• Phase clear memory and reset after printing plate cleaning.
• The distributing rubber roll is covered by wear proof rubber, it's good at ink transmission.
• Steel anilox roll with the treatment of grinding, pressing overlapping curve and chrome plated.

4. Die-cutter with Slotter Combined unit:

• Die-cutting roller adopt high quality casting material, thickness is 30 mm, with good quality and dynamic balancing correction, hard chromium plating.
• Main body wallboard adopt high quality cast iron material, wall thickness is 50 mm,processing by large-scale machining center.
• Soft roller automatically repair institutions improve gluesheath of repeated use, can repair 3-4 times
• Linear speed automatic compensation, to ensure that each batch of carton die-cutting size exactly.
• Imported Taiwan super resistant polyurethane rubber gasket, convenient installation, the die cutting times can up to 120 million times.

6. Technological parameter