HRB-920 1224 1228 High Definition Printer Slotter Die Cutter Machine Case Maker
FEEDER
* Servo motor drive brand BOSCH REXROTH from Germany
*Lead edge feeder with strong vacuum transfer for precise and stable feeding;(made from guangdong province)
* Frequency conversion adjustment vacuum negative pressure value, can adopt to different cardboard specification and curved cardboard.
* Dust remove system with brush and segmented vacuum sheets cleaner
*Motorized backstop forward /backward and up/down position for easy and quick adjustment;
PRINT UNIT
*Adopt ceramic roller and doctor blade for high definition printing quality
*Mounting roller with left and right both of side locking device, let the mounting position more accurately
*Pneumatic clutch is adopted on the anilox roll to:
Make the roll run at the same speed as the main motor when the unit is printing;
Make the roll stop when the unit is not printing;
Reduce the possibility of damage to the rubber roll and the anilox roll for in proper operation;
Allow units which are not in use to be washed up while running.
*Quick set and self locking pull collars.
*Cleaning function can be automatically switched to ensure the ink recycling thoroughly
SLOTTER UNIT
*Single shaft five blades slotting ,an internal gear adjusts the height of the carton box and prevents the lubricating oil from spilling or leaking onto the cardboard
*The first pre-creasing, the cardboard not be damaged after pre pressing.
*Slotting bosses move along liner lead rails and are driven by lead screws for flexible and precise movement.
*Upper boss and lower boss are coupled to keep the two knives aligned while moving, which is helpful to prolong service life.
*Transversal movement of the pre-creasing rolls, and slotting bosses’ are digital controlled by motor and PLC
*Flexible angle cutting knife can cut 3 or 5 or 7 ply cardboard with no adjustment, easy to operate.
DIE CUTTER
*With separate servo motor.
*Side to side oscillation of anvil drum(45mm)
*The die drum’s transverse movement can prolong the service life of anvil cover.
*Die-cutting register is digitally controlled by motor and PLC
*The die-cut cylinder lateral register is digitally controlled by motor and PLC, rang about±10mm
*Motorized caliper adjustment between anvil roll and die drum.
*Auto speed compensation system controlled by the independent motor can achieve the superb die accuracy.
*Anvil rubber roller speed compensation adopted independent motor for driving to control the rubber roller speed, the compensation scope is ±3mm.
*Anvil cover is Depride made from Germany
