HRB WJ150-1800-I Type Three Layer Corrugated Paperboard Production Line

HRB WJ150-1800-I Type Three Layer Corrugated Paperboard Production Line

※main technical parameters and requirements in production line

type:WJ150-1800-I type three layer corrugated paperboard production line:

The maximum production width of the corrugated cardboard:1800mm

Design speed:150m/min

Economic speed:80-120m/min

note:Production line speed test paper should meet the following requirements:(the surface temperature of the equipment is not less than 172℃)

﹡Paper rating of not less than B grade ﹡Paper moisture content of about:11%±2%

﹡top paper:100—250g/m2 ﹡core paper:100--250g/m2

﹡corrugated paper:100—150g/m2

1.Flute-type combination:A ,C, B, E(as customers’ requirement)

2.Steam the necessary requirements:

﹡amount of steam 1500—2000Kg/Hr ﹡the highest pressure:1.2Mpa

﹡common pressure:0.8-1.1Mpa

6,power supply:380V 50Hz Three-phase four-wire system

7,equipment installed total power:about150KW

The actual power consumption:about 80KW(full speed)

8,equipment covers:about52m×10m×5m(Specific length of foundation Figure prevail)

9,Equipment out of paper orientation:According to the user to determine the transmission plant set left or right position

10,Equipment applicability,Available in A, B, C class domestic or imported paper Paper

※Customer-owned section

1,steam heating system:proposal with 2000Kg / Hr of a steam boiler pressure:1.25Mpa steam pipeline.

2,air compressed machine,air pipeline,glue conveying pipe.

3,power supply,wires connected to the operation panel and line pipe.

4,water sources,water pipelines,buckets and so on.

5,Water, electricity, gas flush mounting civil foundation.

6,Test with the base paper,corn starch (potato),Industrial use caustic soda,borax and other material.

7,Oil equipment,lubricating oil,hydraulic oil,lubricating grease.

8,installation,commissioning of food, accommodation.And provide installers with the installation.