HRB-320C Corrugated Paperboard Single Facer Machine / Flute Cardboard Making Machinery

※SF-320C SINGLE FACER MACHINE

※structural feature:

★adopt suction hood structure,matched high pressure powerful fan,Suction with silence.Operating side closed full cover.

★By vacuum suction by the fan box will corrugated corrugating absorbed approximately 180 degrees within a negative pressure zone to complete corrugated shape.

★lower corrugated roller suction width is 2.5mm,it can reduce corrugated cardboard streak marks.

★Drives independent transmission universal joint drive, isolate the source of vibration, easy maintenance, smooth running, transmission gears are oil-immersed lubrication, the gears durable. Cast iron wall thickness of 240mm.

★install the corrugated lifting trolley above the transport flyover,we need to use the car to remove the tile when the roller assembly and pressure roller, etc., and convenient.

★Glue roll unit deliverable device during maintenance coating unit as a whole is maintained at Sway the machine as a whole through the eccentric shaft, saving maintenance time and improve efficiency.

★The humidity control apparatus equipped with a spray that flute type of deformation to maintain good stability, prevent chapped by dry and wet valve control local area as needed.

★Automatic circulation system for glue, glue cylinder unit, with good cushioning effect.★glue part can adopt outfitted slide structure,glue roll surface after grinding engraved pit style textured and hard chrome plating.

★Corrugated roll materials are used 48CrMO forging steel, quenched and tempered → roughing → → shaft bore fine boring heads drying equipment → Welding → tempering to stress → finishing → roughing → IF quenching → CNC grinder grinding →hard chrome plating.

★The gap between the use of glue rollers and the lower corrugating worm reducer manual fine structure, by limiting their mutual parallelism adjustment screw and eccentric, easy and intuitive.

★main power variable frequency motor drive, the machine by the French Schneider (Schneider) program control, low failure rate.

★glue width electric adjustment,to adapt all the base paper change.

★Amount of glue size with electric adjustment, touch screen display and operation of transmission glue gap by the encoder and high accuracy.

★Power and operating parts with a safety net to ensure the safety of personnel in the operation of machinery.

★Corrugating roller and pressure rollers adopt air spring pressure system, stable.

★Core paper to install a steam humidification devices.

※technical parameters:

1,effective width:1800mm 2,operate direction:left or right(Determined in accordance with the customer's facility)

3,design speed:200m/min 4,range of temperature:160—220℃

5,air source:0.4—0.9Mpa 6,steam pressure:0.8—1.3Mpa

7,corrugate flute:(UV type or UVV type)

※Roller diameter parameters:

1,upper corrugated roller diameter: ￠320mm

2. lower corrugated roller diameter:￠320mm

3,pressure roller diameter: ￠323mm glue roller diameter:￠268mm

2,4,paste fixed roller diameter: ￠140mm preheat roller diameter:￠402mm

※powered motor parameters:

3,1,main drive motor:30KW rated voltage:380V 50Hz continuous(S1)working system

4,2,suction motor:11KW rated voltage:380V 50Hz continuous(S1)working system

5,3,adjust glue reducer:100W rated voltage:380V 50Hz short (S2)working system

6,4,adjust glue gap motor:250W rated voltage:380V 50Hz short (S2)working system

7,5,glue pump motor: 2.2KW rated voltage:380V 50Hz continuous(S1)working system

※Mainly purchased parts, raw materials and origin: